
( Brand: Palomar ), ( Manufacturer Part Number: RFX85 ), ( Part Type: Meter Radio )
The RFX85 10 Meter Amplifier Replacement is a powerful and reliable solution for enhancing your RF (Radio Frequency) communication in the Ham Radio 120 band. This amplifier, specifically designed for the Palomar 10-meter band, boasts a frequency range of 28.000 MHz to 29.700 MHz.
Crafted with high-quality materials and components, this RFX85 amplifier is built to withstand the rigors of regular use in amateur radio operations. It features a robust output power of 100 watts PEP (Peak Envelope Power), ensuring clear and strong transmissions, even over long distances.
The amplifier is designed with a low-noise figure of 1.5 dB, ensuring minimal interference and maintaining the quality of your signal. It also boasts a high gain of 14 dB, amplifying your signal for better reach and reception.
The RFX85 10 Meter Amplifier Replacement is easy to install, with a simple plug-and-play design. It features a single-space 2-by-2-inch chassis, making it a space-saving solution for your Ham Radio setup. The amplifier is also equipped with a built-in temperature sensor, ensuring optimal performance and longevity.
In summary, the RFX85 10 Meter Amplifier Replacement is a powerful and reliable amplifier for your Ham Radio 120 Palomar setup. With its high output power, low noise figure, high gain, and easy installation, this amplifier is a must-have for any serious amateur radio enthusiast.
Pros of buying a RFX85 10-meter Amplifier:1. Power: The RFX85 is a high-power amplifier, capable of delivering up to 100 watts of output power, which is beneficial for long-distance communications.
2. Frequency Range: It operates on the 10-meter band (28-29.7 MHz), which is widely used for amateur radio communication and is popular for its long-range capabilities.
3. Compact Size: The RFX85 is a compact, lightweight device, making it easy to transport and install in various locations.
4. Easy Installation: It has a simple, plug-and-play design, requiring minimal setup and configuration.
5. Cost-Effective: Compared to other high-power amplifiers, the RFX85 is relatively affordable, making it an attractive option for budget-conscious ham radio enthusiasts.
Cons of buying a RFX85 10-meter Amplifier:1. Heat Dissipation: High-power amplifiers, like the RFX85, can generate a significant amount of heat. Proper ventilation and heat dissipation mechanisms should be considered to prevent overheating.
2. Power Consumption: The RFX85 consumes a substantial amount of power, which may increase operational costs and require a powerful power supply.
3. Potential for Interference: High-power amplifiers can potentially cause interference with other radio systems or neighboring ham radio operators, especially if proper filtering and isolation measures are not implemented.
4. Limited Bandwidth: While the RFX85 operates on the 10-meter band, it may not be compatible with other frequency bands or modes, limiting its versatility.
Conclusion:The RFX85 10-meter Amplifier is a powerful and affordable option for ham radio enthusiasts looking to boost their signal's range on the 10-meter band. However, it is essential to consider potential drawbacks such as heat dissipation, power consumption, and interference potential before making a purchase. Proper installation, filtering, and ventilation measures should be taken to ensure optimal performance and minimize any negative impacts.
Recommendation:If you are looking for a high-power amplifier for the 10-meter band, the RFX85 is a viable option. Ensure you have a suitable power supply and proper ventilation to prevent overheating, and consider implementing interference-mitigation measures to maintain good relations with other radio operators. In addition, make sure that the RFX85 will work with your specific radio setup and intended usage.
Supply voltage : dimensions: power consumption: 12 amps max. The output power of RFX85 varies depending on transceiver it is installed. The RFX85 circuit includes driver stage, final amplifier stage and low pass filter. Final stage: erf7530 misfit x1.
The addition of adjustable fully regulated bias greatly improves Sb performance and allows for perfect inning to almost any radio circuit. Drive stage: erf2030 misfit x1. Electrically, the RFX85 features a fully regulated bias circuit with adjustable control pots for both theerf2030 driver stage and erf7530 nal.
The RFX85 units feature new fan-ready heat sink design and variable bias controls for better tuning on Sb radio installations. Most installations will see watts pep output power. The rfx75 features latest power misfit technology and a fully regulated bias circuit with adjustable control pots for both erf2030 driver stage erf7530 final.
The is fan-ready and supports mounting of either one centered fan or two side-by-side fans. Mechanically, the RFX85 features a new design with thicker NS for more heat dissipation and greater performance.
Compatible with these radios and more:cobra 25 cobra 29 cobra 148 early model new model's ept3600 chassis radiosept6900 radios galaxy dx929 misfit final version galaxy dx939, dx949, dx959, ranger 396, 696, 966 2 969 versions Galaxy magnum s-3, s-6, s-9 10 meter transceivers main printed circuit board numbers 9821r21rci 2950rci 2950dx. Rfx85 specifications: maximum output: 100 watts pep.
The aluminum heat sink on this unit is fan-ready. Spurious emission suppression: 45 db. 1 x low pass filter: 3 stage.