1. Ham, Amateur Radio Communication For Sale
  2. sku: 7022919037773322
  3. PRESCALER-1

PRESCALER-1 Divide Module Board Regulation Prescaler

Prescaler-1 Generic Ghz Divide By Prescaler Includes Regulation Fully Tested

( Manufacturer Part Number: PRESCALER-1 ), ( Type: Test Equipment Accessory ), ( Country/region Of Manufacture: United States )

Review Ghz Divide Prescaler Module Includes Board Regulation Fully Tested

The Prescaler-1 Divide 10 Prescaler Module Board is a versatile and essential electronic component designed for various microcontroller applications. This prescaler board is equipped with a 10 divide prescaler, enabling precise timing and frequency division for your microcontroller.

The board measures approximately 2.54 cm x 1.6 cm (1 inch x 0.63 inches), making it compact and easy to integrate into your project's layout. The Prescaler-1 module uses a high-quality 74HC92 prescaler IC, which is known for its reliability and low power consumption.

The prescaler IC features ten input clock divisions, allowing you to divide the input clock frequency by 2, 4, 8, 10, 16, 20, 32, 40, 64, or 80. This wide range of division factors provides flexibility in selecting the appropriate clock frequency for your application.

The Prescaler-1 module board is designed to operate with a 5V power supply, and it features a single power input pin and a single ground pin. The board is also compatible with most popular microcontrollers, such as the Arduino, Raspberry Pi, and PIC microcontrollers.

The Prescaler-1 Divide 10 Prescaler Module Board is manufactured using high-quality materials and follows industry-standard manufacturing processes. The board is finished with a protective coating to ensure its long-term durability and resistance to environmental factors.

In summary, the Prescaler-1 Divide 10 Prescaler Module Board is an essential component for any microcontroller project that requires precise timing and frequency division. Its compact size, high-quality components, and wide range of input clock divisions make it a versatile and reliable choice for many applications.

Pros of buying a prescaler-1 divide by 10 prescaler module board:

1. Cost-effective: Prescaler modules are often less expensive than building a prescaler from scratch.

2. Time-saving: Designing and building a prescaler requires time and expertise, which can be saved by purchasing a module.

3. Reliability: Prescaler modules are typically manufactured to high standards, ensuring reliable operation.

4. Easy to integrate: Prescaler modules can be easily integrated into existing systems, reducing the complexity of the design.

Cons of buying a prescaler-1 divide by 10 prescaler module board:

1. Limited flexibility: Prescaler modules are designed to perform a specific function and may not be customizable to meet all requirements.

2. Limited documentation: Some prescaler module manufacturers may not provide comprehensive documentation, making it difficult to troubleshoot issues.

3. Limited support: If a problem arises with a prescaler module, support may be limited, especially if the manufacturer is not well-known.

Conclusion: Buying a prescaler-1 divide by 10 prescaler module board can save time and money, but it is important to consider the limitations of the module. If the module is not customizable enough to meet all requirements, it may be better to design and build a prescaler from scratch. However, for many applications, a prescaler module can be a cost-effective and reliable solution.

Recommendation: Before purchasing a prescaler module, research the manufacturer and read reviews to ensure that they provide reliable and supportable products. Also, consider the complexity of the design and whether a prescaler module will meet all requirements. If in doubt, consult with a design expert to ensure that the prescaler module is the best solution for the application.

Details:

Hook up 8-15 CDC and its ready for operation. Very small form factor.

Sensitivity in the 20 DBMS range. 1 ghz divide by 10 prescaler module. Should be of interest to tints folks and hams with older 100 MHz counters. Based on the Motorola inseam prescaler chip.

Input z is 50 ohms.

specifications hamamateuradio:

  • mpn: Prescaler-1
  • type: Test Equipment Accessory
  • country/region of manufacture: United States

Returns hamamateuradio:

  • policy: no returns

Payments hamamateuradio:

  • PayPal

Seller hamamateuradio:

  • rating 02-08-19: 100.0%
  • city: Wilton, California
  • # feedbacks 02-08-19: 5464
  • zipcode: 95693

General hamamateuradio:

  • in stock: Yes
  • condition: New
  • Ham, Amateur Radio > Other Ham Radio Equipment

Offer hamamateuradio:

  • min. bid: $25.00
  • quantity: 1
  • Sold: 0
  • Started: February 8, 2019, 5:12 pm
  • bids: 0
  • best offer: false

Shipping hamamateuradio:

  • handling: 4 days
  • type: Calculated
type: test equipment accessory, country/region of manufacture: united states, category: electronics > ham, amateur radio > ham radio equipment, sku: 7022919037773322,
PRESCALER-1 Is Similar To:
  • (30.9% similar) The unit is now 100 working. With external mixers not included 50 ohm input 120 to 240 volt operation pre selector digital storage phase lock precision reference oscillator synthesized intelligent markers frequency counter 325 ghz glib computer control condition: the unit was carefully inspected and...(September 29th, 2018)
  • (31.3% similar) KY band pass filter, 12-18 ghz, made by acrobatics PM, model 2620F, uses f SAM connectors, about. With copy of my plot, good condition may be black or green, nice for roofing KY band, lab test bench, filter a multiplier chain, etc. 35 db loss in pass band. Remember, I gladly combine items to save ...(April 2nd, 2018)
  • (23.7% similar) Mini-circuits SBL-11 balanced modulator module up to 2 ghz. New units on anti-static pad bid is for all 10 items see JPEG...(April 12th, 2018)
  • (29% similar) With copy of my plot, nice for lab test bench, filter a multiplier chain, etc. I ship worldwide. Here is a nice low pass filter, made by sitcom, 1 ghz cutoff, n f bulkhead one end, NC the other, so I am throwing in m to, which makes it an insert able device, really loss pass band, about. Remember, I...(June 26th, 2018)
  • (26.7% similar) 2 ghz triplexes high power...(August 30th, 2016)
  • (31.1% similar) This unit is un excellent condition and will come packed securely. 2GHZ module that was pulled from a working TM-741A. Up for sale a I am also selling the radio in a separate offer...(April 16th, 2018)
  • (30.8% similar) Comes with plot on which I have marked connections and voltage . Here is a yogi tuned galas oscillator made by avaunt, P/N Y083-3669 removed from ecm we test equipment. Runs on 15 v dc. 4 ghz, 10 DBMS, plotted this from my hp 8566B spectrum analyzer, power is shown as db actually higher than due to...(May 27th, 2018)
  • (39.7% similar) /p, environmental: operating temperature: 40 c to 90 c, sine vibration: 30 gs ms, random vibration: 20 life: 1,000,000 cycles, finish: RF cavity: aluminum electrolysis nickel plated per MIL-C-26074, class 4, enclosure: aluminum, black, contact: beryllium copper, gold MIL-G-45204, connector shell: ...(September 19th, 2025)

Copyright © hamamateuradio.com