TEN-TEC PM3-A Power Mite Qrp Rig Volt Supply 210
( Brand: Ten-tec ), ( Manufacturer Part Number: PM3-A ), ( Part Type: Supply ), ( Supported Modes: Cw )
Review TEN TEC Power Mite Qrp Rig Model 210 Volt Supply
The PM3-A PowerMite PM3 QRP Transceiver, a product by Ten-Tec, is a versatile and compact HF transceiver that is powered by a 12-volt supply. This rig is designed for QRP (Low Power) operations, making it an ideal choice for portable or emergency communication scenarios.
The PM3-A features a frequency range of 1.8 to 30 MHz, covering the entire HF band. It boasts a high-performance, direct-conversion receiver with a 14-bit ADC, providing excellent signal-to-noise ratio and selectivity. The transmitter is a Class E design, offering efficient power output of up to 10 watts with the included 12-volt power supply.
The PM3-A features a high-resolution, backlit LCD display, providing clear and easy-to-read information such as frequency, mode, power output, and SWR. The rig includes a built-in keyer for CW operation, and it supports various modes such as CW, SSB, and FM. It also features a built-in microphone and speaker, although external audio interfaces can be connected for more advanced audio processing.
The PM3-A is designed with portability in mind, featuring a compact and lightweight form factor. It is equipped with a detachable antenna connector and a built-in audio interface, making it easy to set up and use in various environments. The rig is also dust and water resistant, making it suitable for use in outdoor or harsh environments.
In summary, the PM3-A PowerMite PM3 QRP Transceiver is a high-performance, versatile, and portable HF transceiver that is perfect for QRP operations. Its direct-conversion receiver, Class E transmitter, and wide frequency range make it a powerful and reliable tool for any amateur radio enthusiast.
Pros of buying a PM3-A PowerMite PM3 QRP rig with 12V supply and Ten-Tec:1. High-quality construction: Ten-Tec is known for its high-quality, reliable products, which is a good indication that the PM3-A PowerMite is well-built and will last a long time.
2. Versatility: The PM3-A PowerMite is a QRP (less than 15 watts) HF transceiver, which makes it suitable for a variety of operating conditions, including portable and emergency situations.
3. Efficient power supply: The 12V supply is an efficient power source for the PM3-A PowerMite, which can help conserve battery power during portable operations.
4. Compact size: The PM3-A PowerMite is a compact rig, making it easy to transport and set up in a variety of locations.
Cons of buying a PM3-A PowerMite PM3 QRP rig with 12V supply and Ten-Tec:1. Higher price point: Compared to other QRP rigs on the market, the PM3-A PowerMite and its accompanying 12V supply may be more expensive.
2. Limited features: The PM3-A PowerMite is a basic HF transceiver, and may not have all the features that more advanced rigs offer.
3. Limited bandwidth: The PM3-A PowerMite is a QRP rig, and may not have the same bandwidth as more powerful transceivers.
Conclusion:The PM3-A PowerMite PM3 QRP rig with 12V supply and Ten-Tec is a high-quality, versatile and efficient option for amateur radio operators who are looking for a portable and reliable HF transceiver. Its compact size, high-quality construction, and efficient power supply make it a great choice for portable and emergency operations. However, its higher price point compared to other QRP rigs and limited features may be a drawback for some users. Ultimately, whether or not the PM3-A PowerMite is the right choice for you will depend on your specific needs and budget.
Recommendation:If you are looking for a high-quality, portable and reliable HF transceiver, and you are willing to invest in a more expensive option, the PM3-A PowerMite with 12V supply and Ten-Tec is a great choice. However, if you are on a tighter budget or prefer a more feature-rich rig, you may want to consider other options on the market. It's always recommended to research and compare different options before making a final decision.
Details:
Heard lots of signals on 40 meters, no antenna for 20 meters. The book is easily accessed in PDF for by a quick google search. Good luck buying. Appears to be all original knobs and feet.
The power supply has a replacement cord on it, it two 12 volt output jacks, you can run transceiver and an accessory such as keyed off this same unit. The receiver is direct conversion, while sensitive, its performance similar to other dc receivers I have used, not much selectivity. That mod can be easily reversed if you so choose.
No extra holes or blatant modifications, the previous owner placed a small headphone jack where one on tip jacks belongs. Ten Tec pm-3 qrp transceiver with matching model volt dc power supply, and a connecting cord. The audio squeals if you run volume up top high, but that didn affect my test contacts.
Tested rig into dummy load on both 40 and 20 meters, measure about 1 watts output each band. Comes with connecting cord but no book.
part #: pm3 prices
- $69.99-$324.99
specifications hamamateuradio:
- brand: Ten-tec
- mpn: Pm3-a
- part type: Supply
- supported modes: Cw
Payments hamamateuradio:
- PayPal
General hamamateuradio:
- condition: Used
- consumer electronics > radio communication electronics > ham amateur radio communication
- in stock: Yes
Seller hamamateuradio:
- zipcode: 47374
- city: Richmond, Indiana
Shipping hamamateuradio:
- handling: 1 days
- type: Calculated
Returns hamamateuradio:
- policy: returns accepted
- type: Money Back
- paid by: Buyer
- time: 30 Days
Ratings:
- THIS IS A GREAT PERSON TO DO WITH AND I HIGHLY RECOMMEND-A A A A A A A 04-19-18
- G 04-21-18
- Great Items, Fast Shipping 04-19-18
- Item as advertised, shipped promptly. 04-17-18
- Just what I was looking for very fast shipping will buy again. 04-18-18
Offer hamamateuradio:
- quantity: 1
- Started: April 21, 2018, 5:47 am
- Sold: 0
- best offer: false
- bids: 0
Ten-tec PM3 Is Similar To:
- 1251 Ten-tec Ten Tec Rf (28.2% similar) You can tuck the wire under a carpet, or even use metal window frame cold water pipe. The character of a series tuned circuit is to have maximum current at resonance, thus when you get peak in meter from varying adjustments caps and variable torpid indicator, will optimum setting. The knob switches ...(June 1st, 2017)
- 1254 Ten Tec Receiver (28.9% similar) You are buying on one used good working ten tec 1254 Sb cw am microprocessor-controlled 100 khz MHz receiver. Comes with power adapter only...(September 16th, 2018)
- 1330 Ten Tec Model Qrp Meter Cw Transceiver (34.7% similar) Over 2 watts output on the 30 meter amateur band, with excellent receive sensitivity for a rig this size. Includes original manual. Ten tec model 1330 qrp 30 meter hf cw transceiver in nice condition. Buyer pays only actual shipping cost...(October 15th, 2018)
- 1340 Tentec Ten-tec Cw Transceiver (31.5% similar) This is a new looking Ten-tec model 1340 cw low power transceiver for the forty meter band. I have no manual, but it is well represented on the web for free download...(August 14th, 2017)
- 276a Ten-tec Ten Tec Model (37% similar) For century 21 analog or digital. Also I have not had a radio like this in yrs so no way to test it. Could possibly used on other units with mods to plug 25 khz and 100 functions it looks be unused but I cant sure of that bet is...(April 21st, 2017)
- 307spkr Ten Tec Model External Desktop Speaker Matching Orion Omni Black (33.1% similar) TN for your interest on this item. Thanks and 73 shipping is 19. E-mail for any questions...(May 30th, 2018)
- 538at-jupiter Ten-tec 1 Tentec 538at (30.8% similar) Shipped USA only. Works great. Includes 963 power supply, 706 base microphone,manual,power cord. Very good shape cosmetically. Free shipping. Probably shipped in two boxes. Serial 12C10475. Was bought originally to be my radio in garage, but far good of for there. 1 tented 538AT Jupiter hf ...(July 27th, 2017)
- 555stuff Ten Tec Tentec Scout Band Module Parts (39.2% similar) Tented scout band modules and module parts this is a collection of ten tec 555 imperfect they are untested. E-mail for any questions. I came into possession of these when ten tec closed their doors - that's why this is an odd variety stuff. This is all being sold as parts - I don't know what works ...(August 26th, 2018)
- 599at Ten-tec Tentec Model 599 (42.4% similar) I use it for PS, winglike, etc and works very well. For you cw operators: this is one great radio. Using the if band width and shift controls you can adjust it down to 100 Hz move around with no ringing. The package includes following: radio, a power cable with mating connector, original microphone...(November 19th, 2017)
- 708a Ten-tec Omni-directional Dynamic Desk (28.9% similar) Works and looks great. Excellent used condition. Has a 4 pin connection. Ten-tec model 708 microphone for ham radio operations. Please examine pictures and ask questions before buying...(December 1st, 2017)
- 81218 Ten-tec Ten Tec Titan (29.3% similar) I was having relay sticking problems with mine, and found a guy on Th parting one out. I'm willing to take a loss on this one, so starting pricing at less than half of what I paid. Since I did not know what board was giving me problems, bought both relay boards from him for your consideration is ...(March 30th, 2017)
