HAMGADGETS IDOM4 Ham Amateur Radio Matic Iv Voice Repeater Controller Enclosure

( Brand: Hamgadgets ), ( Manufacturer Part Number: IDOM4 ), ( Part Type: Repeater Radio Controller Enclosure ), ( Country Of Manufacture: United States )

Review HAMGADGETS Ham Amateur Radio Id Matic Iv Voice Repeater Controller Enclosure

The iDOM4 Ham Amateur Radio Matic IV Voice Repeater Controller Enclosure, proudly presented by HamGadgets, is a meticulously crafted solution for Ham Radio enthusiasts seeking a robust and efficient way to manage their repeater systems. This enclosure, designed to house the Matic IV Voice Repeater Controller, is constructed from high-quality materials, ensuring durability and longevity.

The exterior of the enclosure boasts a sleek, modern design, with a powder-coated steel finish that is both attractive and resistant to corrosion. The enclosure is also weatherproof, making it suitable for use in various environments, including outdoors.

Inside the enclosure, you'll find ample space for the Matic IV Voice Repeater Controller and its necessary components. The enclosure is equipped with a ventilation system to ensure proper airflow and cooling, preventing overheating and maintaining the optimal operating temperature for the controller.

The enclosure also includes a secure locking system to protect your valuable equipment from unauthorized access or accidental damage. Additionally, it features mounting holes for easy installation and adjustment, allowing you to position the enclosure in a way that best suits your setup.

In conclusion, the iDOM4 Ham Amateur Radio Matic IV Voice Repeater Controller Enclosure offers Ham Radio enthusiasts a reliable, durable, and weatherproof solution for housing their Matic IV Voice Repeater Controller. With its modern design, ample space, ventilation system, secure locking system, and easy installation, this enclosure is an excellent investment for any serious Ham Radio operator.

Idom4 Ham Amateur Radio Matic IV Voice Repeater Controller Enclosure (HamGadgets) is a device intended for amateur radio enthusiasts who use repeaters. Here are the pros and cons of purchasing this enclosure:

1. Durable and weather-resistant construction: The enclosure is designed to withstand harsh outdoor conditions, ensuring your repeater equipment is protected from weather elements.

2. Ease of installation: The enclosure is pre-drilled and comes with mounting hardware, making it easy to install on towers or other elevated structures.

3. Modular design: The enclosure allows for easy customization and upgrades, as you can add or remove components as needed.

4. Quality materials: The enclosure is made from high-quality materials, such as aluminum and stainless steel, ensuring longevity and durability.

1. Cost: The enclosure is relatively expensive, which may put it out of reach for some amateur radio enthusiasts with limited budgets.

2. Limited customization options: While the enclosure is modular, the customization options may be limited compared to building a custom enclosure yourself.

3. Size and weight: The enclosure is relatively large and heavy, which may require additional support or mounting hardware.

If you are an amateur radio enthusiast who uses repeaters and values durability, ease of installation, and customization options, the Idom4 Ham Amateur Radio Matic IV Voice Repeater Controller Enclosure (HamGadgets) is a worthwhile investment. However, if you have a limited budget or prefer more customization options, you may want to consider other options. Ultimately, the decision to purchase this enclosure depends on your specific needs and budget.

Details:

A real-time clock let's you synchronize beacons to the time, and can even be kept accurate with input from GPS receiver. New features are planned for future release, giving you added capabilities at no cost. Just type in your id message. Repeater-builder receiver audio has enough gain to drive virtually any repeater setup due the on-board low noise amplifier.

An input is provided for external audio from your receiver or other source this has a low noise amplifier ic with volume control and mixed the Morse. The cor squelch input can be used to make a repeater controller Oder that works way you want it. The built-in interface circuit and programmable signal polarity let you use either active-high or active-low input signals. Improvements have been made to the original id-o-matic Morse audio output.

The id-o-matic iv has a real-time clock, so you can synchronize beacon id to wall clock if want. Terminal block pins are marked more clearly. Future-proof: the heart of id-o-matic IVs functionality is firmware program that controls processor.

Random beacon timing option - great for fox hunts. Add this to your cart when purchasing one of my repeaters be installed. The board is better optimized for repeater use, with improved volume control.

Quiet time let's you silence beacon transmissions during selected hours like at night. Or send me your repeater and have it installed plus shipping.

Morse code ids are attenuated if the repeater is in use. Installing new features or bug fixes takes about five minutes. A protection diode prevents damage to the board if power is connected backwards. This also enables a handy backup power source in the form of cheap, readily available mini-USB cell phone charger, or battery with connector attached.

It can also be used for beacons, fox hunt transmitters, automatic station id and many other uses. Includes manual link for your download always the latest version. Ken wood PDF Kr-n20-idiomatic.

You can load new firmware using a very simple process, no special hardware or software needed. The pints are similar. The on-board Morse id is filtered and fed to a passive audio mixer with volume control.

Then there are the cw keying and Pitt outputs so you can attach it to a transmitter, transceiver or repeater. You can, for example, have the repeater id with its call sign while being used, and a longer message every hour or two when its idle. The db9 connector and serial port used on id-o-matic ii are replaced by a USB mini-b.

Or use Morse for the regular id, and a voice announcement beacon. All I o signal polarity is set via the setup menu there are no jumpers. Many new or enhanced features - and even more to come.

If you want the repeater to id every so often when its idle, there is a beacon timer and separate message for that too. 95cm, keeps the same connector locations, and mounting hole locations. As before, no special software is needed the device shows up a regular serial port but needs tricky configuration. When the cor input is activated id-o-matic iv will send message at regular intervals.

All outputs are equipped with robust 2n7000 misfits that can handle up to 60v at 200 ma key transmitters or other loads. Free programming and installation. And how about a new USB interface to connect your shack computer, laptop or terminal for quick easy configuration. Its all there.

All ids are polite. And, you can use the alt MSG input to send a different id message and even change courtesy beep based on state of an signal - useful if, for example, your site switches backup power, or if link is active. You can use a squelch, cor, Pitt or other signals from your equipment according to needs.

You can optionally have the id-o-matic send a courtesy beep or up to three Morse code characters at end of each transmission, and specify hang time keep Pitt active for brief period after input stops. The cor input is used to control when id-o-matic iv sends your programmed Morse code id. Includes this high quality enclosure listing id-o-matic iv 4 built and tested.

PDF regardless of the mode used, Pitt output is active during cw id, with a programmable pre and post-id delay. Voice ids are replaced by a Morse id if someone is talking. So what are the more interesting features. Theres a programmable delay timer that announces your call sign or any other message, in Morse code at speed and audio tone you choose.

The circuit board is slightly larger than iii 3 x The 10-pin terminal block used on id-o-matic iii is replaced with a 12 pin. Theres a Pitt watchdog timer to keep your repeater from being hung by stuck mic buttons or long-winded users. Using the built-in USB interface, connect id-o-matic iv to a PC windows, mac, or Linux with free terminal emulation program such as putty minicam and you can use simple menu configure way want it.

With a heritage dating back to the original id-o-matic featured in arr handbook, its primary application is that of simple but feature-laden repeater controller automatic Morse code station id. The setup menu is vastly improved. Id timer repeater controller with Morse code output keyed cw, audio, and Pitt audio combination for keying mixer id optional DE-emphasis audio super-easy USB port configuration fan control auto delay 200 ma max, fan relay option highly suggested the big question is: how does id-o-matic iv compare to ii iii. News voice is available as a low-cost. And, you can set an optional early id timer to let the id-o-matic iv try when repeater is idle.

Speed is variable from 5 to 40 words per minute, and the audio pitch for cw id courtesy beep also programmable via setup menu. Theres a second ground for the audio output, and an added output to indicate when id-o-matic is sending id or beacon.

part #: idom4 prices

• $29.95-$44.95

specifications hamamateuradio:

• brand: Hamgadgets
• mpn: Idom4
• part type: Repeater Radio Controller Enclosure
• country of manufacture: United States

Payments hamamateuradio:

• PayPal

Shipping hamamateuradio:

• handling: 2 days
• type: Calculated
• cost: $0.0

General hamamateuradio:

• in stock: Yes
• consumer electronics > radio communication electronics > ham amateur radio communication
• condition: New

Seller hamamateuradio:

• zipcode: 46234
• city: Indianapolis, Indiana

Returns hamamateuradio:

• policy: no returns

Ratings:

1. Great communication. A pleasure to do business with. 06-06-18
2. Hope to deal with you again. Thank you. 06-04-18
3. A 06-06-18
4. Great communication. A pleasure to do business with. 06-05-18

Offer hamamateuradio:

• best offer: false
• Started: June 7, 2018, 8:25 am
• bids: 0
• quantity: 2
• Sold: 0