AAREFF VERONICA / BROADCAST CONCEPTS FM70MOT Pll Fm Stereo Transmitter Amplifier Boards

( Brand: Aareff Veronica / Broadcast Concepts ), ( Manufacturer Part Number: FM70MOT ), ( Part Type: Transmitter Amplifier Board ), ( Supported Modes: Fm ), ( Frequency Band S : 88 Mhz 108 Mhz ), ( Bundle Listing: Yes )

Review AAREFF VERONICA / BROADCAST CONCEPTS Watt Pll Fm Stereo Transmitter Amplifier Boards

The FM70MOT 70 Veronica PLL FM Stereo Transmitter from Broadcast Concepts is a high-performance radio transmitter designed for reliable and efficient broadcasting. This device is equipped with a Veronica PLL synthesizer, providing excellent frequency stability and selectivity.

The FM70MOT features a powerful amplifier board, the AAREFF, capable of delivering up to 70 watts of RF output power. This ensures a strong and clear signal, ensuring your radio station can reach a wide audience. The amplifier board is designed for optimal efficiency, reducing power consumption and heat emissions.

The transmitter is also equipped with a built-in stereo encoder, allowing for the broadcast of high-quality stereo audio. This ensures that listeners can enjoy a rich and immersive audio experience, enhancing their overall enjoyment of your radio station.

The FM70MOT is also user-friendly, with a simple and intuitive control interface. This makes it easy for even beginners to set up and operate the transmitter, without the need for extensive technical knowledge.

In addition, the FM70MOT is built to last, with a rugged and durable construction. This ensures that the transmitter can withstand the rigors of regular use, providing reliable and consistent performance over the long term.

Overall, the FM70MOT 70 Veronica PLL FM Stereo Transmitter from Broadcast Concepts is a powerful and reliable radio transmitter, ideal for both amateur and professional broadcasters. Its Veronica PLL synthesizer, powerful amplifier board, and built-in stereo encoder ensure high-quality audio broadcasting, while its user-friendly interface and durable construction ensure ease of use and long-term reliability.

1. High-quality components: The Fm70mot 70 Veronica PLL FM Stereo Transmitter and Broadcast Concepts Amplifier Boards are made with high-quality components, ensuring reliable performance and durability.

2. Easy to use: The transmitter and amplifier boards are designed to be easy to use, making it simple for users to set up and operate their FM broadcasting system.

3. Versatile: The Fm70mot 70 Veronica PLL FM Stereo Transmitter supports both mono and stereo broadcasting, making it a versatile option for various applications.

4. Affordable: Compared to other professional-grade FM transmitters and amplifier boards, the Fm70mot 70 Veronica PLL FM Stereo Transmitter and Broadcast Concepts Amplifier Boards are relatively affordable, making them an attractive option for budget-conscious users.

1. Limited output power: The Fm70mot 70 Veronica PLL FM Stereo Transmitter has a limited output power of 70 watts, which may not be sufficient for some broadcasting applications.

2. Limited frequency range: The transmitter supports a limited frequency range of 87.5 to 108 MHz, which may not cover all available FM frequencies in some regions.

3. No remote control: The transmitter does not come with a remote control, which may be a disadvantage for users who require remote control functionality.

The Fm70mot 70 Veronica PLL FM Stereo Transmitter and Broadcast Concepts Amplifier Boards are a good option for users who require a reliable, easy-to-use, and affordable FM broadcasting system. However, users should be aware of its limited output power and frequency range, as well as the lack of a remote control. If these limitations do not present a problem, then the Fm70mot 70 Veronica PLL FM Stereo Transmitter and Broadcast Concepts Amplifier Boards are a worthy consideration.

If the limitations mentioned above are not a concern, then the Fm70mot 70 Veronica PLL FM Stereo Transmitter and Broadcast Concepts Amplifier Boards are a great option for users who require an affordable and reliable FM broadcasting system. However, if users require more output power or a wider frequency range, they may want to consider other options that offer more advanced features.

Details:

Opel dl watt max 20 watts continuous 50 ohm dummy load: excellent condition I bought this brand new and was only used for minutes. Power: 20- watts , max.

A specification sheet is included. 30 db insertion loss maximum 300hz, RF output connector so239 n-type optional, audio input sensitivity 0.

The unit includes audio input output and power leads you can program your Broadcast frequency between 88 108 mhz fm by setting proper 10 dip switches.

7 volts using the small control on front. Broadcast Concepts FM70MOT 70 watt amplifier: new this unit receives the adjustable 0-1 RF output from Aareff 1w pll Veronica fm transmitter exciter. Heat sink x 1/3 8: I bought this used from but, is in good condition.

01 ,pilot tone 19 khz amps typical, no bias adjustments or RF circuit tuning is required. Mean well Sp volts dc: mhz, connector: uhf-male pl-259 RF connectors for rg8 coax cable with reducers rg8x included new 3 am phenol rg8u, rg213, rg59, so239 chassis mount.

9 mhz fm using the included 13. 5 amps power supply: new this unit supplies the 28 volts dc for Broadcast Concepts FM70MOT 70 watt amplifier. Each board includes a specifications and users guide sheets.

It was very clean sounding. The adjustable 0-1 watt RF output is fed into Broadcast Concepts FM70MOT 70 amplifier board. Technical specification: 110mhz, 28 volts , input output 50 ohms, pout: 70w minimum 80 typical, 18db gain 80w, class ab, requires 28vdc at 4. There is no tuning or adjusting on this board.

A metal enclosure is not included. A voltage meter is required to set at 28 volts . Technical specification: 86-110mhz,. Aareff 1w pll Veronica fm transmitter exciter version 9: new this unit receives a mono audio signal with pre-emphasis or the stereo MP output from coder without.

When operating the 70 watt transmitter output it is highly recommended to use a Sr meter not included properly tune your antenna. A voltage meter is required to set at 13. I tested the 1 watt transmitter exciter board, by its self, on 94. 8 volt power supply and dummy load for about 20 Min's.

8 typical ,pre-emphasis 50 or 75 us, stereo crosswalk 35 db min, low audio distortion, less than. There is no soldering required on the 1 watt board, it has terminal connections. Technical specification: audio inputs standard line 0dbu 775mv adjustable, power supply 11-16v dc you can adjust the voltage output between 10.

625 inch tall, each unit is sweep tested on an hp 8753d network analyzer to meet our specifications. There is also great information directly from the manufactures web site on these components. The RF output is soldered to included chassis mount so239 connector. I have posted 12 pictures with of each component.

Does not include packaging. 25db maximum insertion loss, better than 25 db return loss from 88-108mhz. Technical specifications: impedance: 50-ohm, cont. A dip switch program sheet is included.

Rf connectors are included. 8 volt dc power supply. 5-108mhz user programmable, RF power output 1000mw to 1400mw into 50 ohm load, deviation sensitivity stability max, spurious emissions 75db ROTC, harmonic 63db out of lock muting freq khz typ. It does not require a dc power supply.

You can adjust the voltage output between volts 775 v RMS for khz, signal to noise ratio 80 dub, frequency response flat from 30 hz 76 pre-emphasis 50us 75us none delectable, audio distortion better than Thad, input unbalanced terminal block,power supply 12-15v dc regulated 650ma max.

1 amps power supply: new this unit supplies the volts . By making this purchase you agree to be knowledgeable in the assembly of these components.

The 70 watt RF amplifier board gets mounted directly flat in enclosure chassis using heat sink compound and included on outside of. Adjusting the RF output on Aareff 1w pll Veronica fm transmitter exciter will adjust this final stage amplifier. 8v volts using the small control on front.

25 db typical, 25db return loss maximum 28db ACT 100b capacitors, wag indicators, 45db rejection at 176mhz. Technical specification: frequency: mhz, vst: That's the 1st harmonic of 88mhz, size: 2.

15: mhz, vst: Power: 60- watts , frequency: dc to 500 mhz, vst: 1.

part #: fm70mot price

• $380.00

specifications hamamateuradio:

• brand: Aareff Veronica / Broadcast Concepts
• mpn: Fm70mot
• part type: Transmitter Amplifier Board
• supported modes: Fm
• frequency band s : 88 Mhz 108 Mhz
• bundle listing: Yes

Offer hamamateuradio:

• Started: September 8, 2017, 10:53 pm
• Sold: 0
• bids: 0
• quantity: 1
• best offer: false

General hamamateuradio:

• condition: New
• consumer electronics > radio communication electronics > ham amateur radio communication
• in stock: Yes

Returns hamamateuradio:

• policy: no returns

Seller hamamateuradio:

• city: Philadelphia, Pennsylvania
• zipcode: 19149

Shipping hamamateuradio:

• cost: $0.0
• type: Flat
• handling: 5 days

Payments hamamateuradio:

• PayPal

Ratings:

1. Thank you for an easy, pleasant transaction. Excellent buyer.. 08-20-17
2. Great transaction!!!! 08-19-17
3. The BEST CUSTOMER on planet EARTH! Thanks 08-10-17
4. Excellent item, fast delivery, A 08-19-17

Aareff Veronica / Broadcast Concepts FM70MOT Is Similar To:

• Aareff 100mwpllsb 100mw Stereo Driver Transmitter Power On Un-tested (29.1% similar) Aareff 100MWPLLSB 100MW stereo driver transmitter, with antenna and power supply, item powers on, I am not able to test it, therefore listed as parts or repair transmitter...(December 10th, 2025)