1. Ham, Amateur Radio Communication For Sale
  2. sku: 2787589524042253
  3. RALTRON CO6100-29.4912

RALTRON CO6100-29.4912 Qrp Crystal Controlled Oscillator DIP14 10-METER Shielded

Co6100-29.4912 Raltron 10-meter Qrp 29.4912

( Brand: Raltron ), ( Manufacturer Part Number: CO6100-29.4912 ), ( Model: SHIELDED DIP14 CAN ), ( Supported Modes: Cw ), ( Frequency Band S : Hf ), ( Frequency: 29.4912 )

Review RALTRON 10-meter Qrp 29.4912 Mhz Crystal Controlled Oscillator Shielded

The CO6100-29.4912 is a high-quality 10-meter QRP (Quite-Power-Regulated) crystal-controlled oscillator shielded dip package from RALTRON. This oscillator is specifically designed for use in the 29.4912 MHz frequency band, making it an excellent choice for amateur radio applications.

The CO6100-29.4912 is housed in a robust dip14 package, which provides excellent electrical isolation and shielding. This shielding helps to reduce the influence of external electronic noise, ensuring a clean and stable signal output. The oscillator is also crystal-controlled, which means it is highly accurate and reliable, making it ideal for use in applications where precise frequency control is required.

The CO6100-29.4912 is a 5V operated oscillator, making it easy to integrate into a wide range of electronic systems. It features a typical output power of -10dBm, which is suitable for low-power applications. The oscillator also has a typical phase noise of -110dBc/Hz at 100kHz offset, ensuring a clean and stable signal output.

In summary, the CO6100-29.4912 is a high-quality, crystal-controlled oscillator that is ideal for use in the 29.4912 MHz frequency band. Its robust dip14 package provides excellent electrical isolation and shielding, while its 5V operation and low power output make it easy to integrate into a wide range of electronic systems. With its high accuracy and reliability, this oscillator is a great choice for applications where precise frequency control is required.

Pros of buying a CO6100-29.4912 10-meter QRP 29.4912 crystal controlled oscillator shielded dip14 Raltron:

1. High precision: The oscillator has a frequency stability of 0.005%, which ensures accurate signal transmission.

2. Shielded design: The shielded dip14 package protects the oscillator from electromagnetic interference (EMI) and radio frequency interference (RFI), improving signal quality.

3. Wide temperature range: The oscillator has a operating temperature range of -40 C to 85 C, making it suitable for use in various environmental conditions.

4. Low power consumption: The CO6100-29.4912 is a QRP (quiet radio performance) oscillator, which means it consumes less power, making it suitable for battery-powered applications.

Cons of buying a CO6100-29.4912 10-meter QRP 29.4912 crystal controlled oscillator shielded dip14 Raltron:

1. Limited frequency range: The oscillator is only suitable for 10-meter band (29.4912 MHz).

2. Limited availability: The CO6100-29.4912 may not be easily available in all regions, which may result in longer delivery times or higher shipping costs.

3. Higher cost: Compared to other types of oscillators, the CO6100-29.4912 may be more expensive due to its high precision and shielded design.

Conclusion:

The CO6100-29.4912 10-meter QRP 29.4912 crystal controlled oscillator shielded dip14 Raltron is a high-quality oscillator suitable for applications that require high precision and EMI/RFI protection. Its wide temperature range and low power consumption make it a good choice for battery-powered applications. However, its limited frequency range and higher cost may make it less suitable for some users. Ultimately, the decision to purchase the CO6100-29.4912 depends on the specific requirements of the application and the user's budget.

Recommendation:

If high precision and EMI/RFI protection are important requirements for your application, the CO6100-29.4912 10-meter QRP 29.4912 crystal controlled oscillator shielded dip14 Raltron is a good choice. However, if you require a wider frequency range or a lower cost, you may want to consider other types of oscillators. It's always a good idea to compare multiple options and consider the specific requirements of your application before making a purchase.

Details:

Important: nine volts greatly exceeds the specs 5. I tested one of these oscillators at 9 volts for several hours. The output pin 8 is a Tl compatible square wave producing approx.

Pin 1 squared corner is not used. Data sheets are provided when available.

LP's are not included. Taking it to the next level I tried applying 12 volts .

We tried it and here is what I found. Nevertheless, operation at voltage s exceeding the specifications may shorten lifespan of part.

I estimate an output of about 300 MW in to the load, but do not have equipment measure it precisely. At 5 volts , current pin 14 measured 4. Your results may vary.

The four-pin footprint matches corner pins of a standard DIP14 package. Bear in mind that these tests were conducted a continuous on state and intermittent duty such as cw mode should be less stressful. The frequency shifted downward 250 hz from 5 volt level but RF output voltage doubled.

8 times the level seen with 5 volts applied, producing almost output power. The curious experimenter may find risk acceptable. Any known deficiencies are listed in the detailed. Permanent damage may occur at this voltage current level and is only discussed here for experimental purposes.

The output is a Tl compatible square wave and LPG low pass filter recommended to remove harmonic content. 5 volt max so there is no guarantee any given unit will work at all 9 volts or for how long.

Again, after allowing a moment to stabilize, there was little change during 90 minute test. That quadrupled the power to about 150 MW.

The can warmed a barely noticeable amount. The can did not get warm during test.

With 5 volts applied, the output power is approximately MW into a positively coupled load. The other parts shown in schematics are not included.

Note: this listing is for the oscillators only. Parts from a larger oem package may be repacked for smaller lot size orders or more practical handling and shipping. Some data sheets may be close but not a perfect match because of part revisions or they from different manufacturer.

With twelve volts applied the unloaded current was 21 ma while loaded, rose to 53 for an input power of a little over 600 MW. Pin 7, ground, is internally connected to the metal can. Data sheet: Raltron co6100-29.

specifications hamamateuradio:

  • brand: Raltron
  • mpn: Co6100-29.4912
  • model: Shielded Dip14 Can
  • supported modes: Cw
  • frequency band s : Hf
  • frequency: 29.4912

Shipping hamamateuradio:

  • cost: $2.9
  • handling: 1 days
  • type: Flat

Returns hamamateuradio:

  • time: 30 Days
  • paid by: Buyer
  • type: Money back or exchange buyers choice
  • policy: returns accepted

Offer hamamateuradio:

  • best offer: false
  • bids: 0
  • Started: December 25, 2017, 9:15 pm
  • quantity: 12
  • Sold: 0

Seller hamamateuradio:

  • city: Garland, Texas
  • zipcode: 75044

Payments hamamateuradio:

  • PayPal

Ratings:

  1. thanks 12-24-17
  2. Lightening fast delivery. Thank you. A 12-21-17
  3. as advertised, quick shipment, thanks 12-19-17
  4. Perfect! Fast Shipping! Thank you. 12-14-17
  5. As expected. 12-24-17

General hamamateuradio:

  • in stock: Yes
  • consumer electronics > radio communication electronics > ham amateur radio communication
  • condition: New other see details
supported modes: cw, frequency band s: hf, frequency: 29.4912,
category: electronics > radio communication electronics > ham amateur radio communication, sku: 2787589524042253,
Review#1 thanks ()
Review#2 Lightening fast delivery. Thank you. A ()
Review#3 as advertised, quick shipment , thanks ()
Review#4 Perfect! Fast Shipping! Thank you. ()
Review#5 As expected. ()

Copyright © hamamateuradio.com