1. Ham, Amateur Radio Communication For Sale
  2. sku: 1954832648211292
  3. ARTCRAFT ELECTRONICS AEAH-4

ARTCRAFT ELECTRONICS AEAH-4 Icom Antenna Tuner Interface V2

Aeah-4 V2 Artcraft Electronics Icom

( Brand: Artcraft Electronics ), ( Manufacturer Part Number: AEAH-4 ), ( Part Type: Antenna Tuner Interface ), ( Country/region Of Manufacture: United States )

Review ARTCRAFT ELECTRONICS Icom Ah-4 Antenna Tuner Interface V2

The AEAH-4 ArtCraft iCOM AH-4 Antenna Tuner Interface V2 is a sophisticated and versatile device designed to optimize the performance of your radio system by automatically matching the impedance of your antenna to your transceiver. This tuner interface is an essential tool for any amateur radio operator, providing superior tuning capabilities and ensuring the best possible signal quality.

The AEAH-4 ArtCraft iCOM AH-4 Antenna Tuner Interface V2 is compact and lightweight, making it easy to transport and install in various locations. It features a high-quality, ruggedized design with a sturdy aluminum enclosure, ensuring durability and reliability in even the harshest weather conditions.

The tuner interface is compatible with a wide range of transceivers, including iCOM radio models, making it a versatile solution for many amateur radio enthusiasts. It uses advanced software-controlled technology to provide accurate and precise tuning, enabling you to maximize your radio's performance and minimize signal loss.

The AEAH-4 ArtCraft iCOM AH-4 Antenna Tuner Interface V2 features a user-friendly LCD display, allowing you to easily monitor tuning settings and adjust parameters as needed. It also includes a simple interface with just a few buttons, making operation straightforward and intuitive, even for beginners.

In addition, the tuner interface includes various safety features to protect your transceiver and antenna from damage. It features automatic power control, preventing over-voltage and over-current conditions, and it includes a built-in fuse to protect against electrical faults.

Overall, the AEAH-4 ArtCraft iCOM AH-4 Antenna Tuner Interface V2 is a high-performance and reliable tuner interface that provides optimal tuning for a wide range of transceivers and antennas. Its compact size, rugged design, and user-friendly interface make it an excellent choice for amateur radio operators looking to enhance their radio system's performance and ensure the best possible signal quality.

Pros of AEA-4 ArtCraft ICOM AH-4 Antenna Tuner Interface V2:

1. Wide frequency range: The AEA-4 covers a wide frequency range from 160 to 6 meters (1.8 MHz to 50 MHz), making it suitable for various amateur radio applications.

2. ICOM compatibility: The AEA-4 is specifically designed for ICOM radios, ensuring seamless integration and operation with compatible models.

3. User-friendly interface: The AEA-4 features an easy-to-read LCD display and simple buttons for easy tuning and control.

4. Durable construction: The AEA-4 is built with high-quality materials, ensuring long-term reliability and durability.

5. Automatic tuning: The AEA-4 uses automatic tuning to quickly and accurately match your antenna to the radio, saving you time and effort.

Cons of AEA-4 ArtCraft ICOM AH-4 Antenna Tuner Interface V2:

1. Limited compatibility: The AEA-4 is specifically designed for ICOM radios, which may limit its usability for users with different radio brands.

2. Price: The AEA-4 is more expensive than some other antenna tuners on the market, which may be a consideration for budget-conscious users.

3. Size and weight: The AEA-4 is larger and heavier than some other antenna tuners, which may be a consideration for portable or mobile radio applications.

Conclusion:

The AEA-4 ArtCraft ICOM AH-4 Antenna Tuner Interface V2 is a high-quality, user-friendly antenna tuner designed specifically for ICOM radios. Its wide frequency range, automatic tuning, and durable construction make it an excellent choice for amateur radio operators looking for reliable and efficient antenna tuning. However, its limited compatibility, higher price, and larger size may be cons for some users. Ultimately, the decision to purchase the AEA-4 depends on your specific radio brand, budget, and mobility needs. If you are an ICOM radio user looking for a high-quality antenna tuner, the AEA-4 is a great option to consider.

Recommendation:

If you are an ICOM radio user and in the market for an antenna tuner, the AEA-4 ArtCraft ICOM AH-4 Antenna Tuner Interface V2 is a worthy consideration. Its user-friendly interface, wide frequency range, and durable construction make it an excellent choice for amateur radio operators. However, it is important to weigh the pros and cons and consider your specific needs before making a purchase decision.

Details:

One of the nice things about ah-4 is it provides a reasonable load for your rig even before tuner activated. Ah-4 four pin connection b.

Components sourced world wide. Turning off your rigs electronic keyed would be a good idea. Artcraft Electronics was asked if this will work with a k3. Push the red button on AEAH-4 for about half a second to and listen as ah-4 keys transmitter tunes.

Set your transceiver for 10w cw output note the ts2k must have Cox button selected to transmit.

Cw keying line connected to the transceiver c. The answer is yes. It should take 1 to 3 seconds depending on the antenna tune up. Us shipping is USPS priority mail.

I use a 40w incandescent light bulb for testing, and decent ground connection. Artcraft Electronics has updated the enclosure of aeah 4 to a more weather resistant model that rubber gasket between upper and lower sections. Reset your transceiver to the mode and power you want use operate. Built for you in the USA.

The AEAH-4 allows you to use your icom ah-4 tuner from any transmitter that is able transmit cw at 10 watts . Each AEAH-4 is tested with the allowing ken wood ts-2000 to work ah-4 tune up a light bulb power connected power pole connector The AEAH-4 has three connecting cables: one for power which supplies to icom ah-4 as well, interface with 4 pin mole connector ah-4, and provide cw keying transceiver. All penetrations of the bulkhead and top unit are also sealed to improve weather resistance interface.

The interface will work with an ah-2 as well. Note: the AEAH-4 will work with any transmitter able to be cw keyed at 10w.

I describe operation with a ken wood ts-2000 because that is the radio on test bench.

specifications hamamateuradio:

  • brand: Artcraft Electronics
  • mpn: Aeah-4
  • part type: Antenna Tuner Interface
  • country/region of manufacture: United States

Seller hamamateuradio:

  • city: Fort Collins, Colorado
  • zipcode: 80526

Offer hamamateuradio:

  • quantity: 1
  • Started: May 10, 2017, 9:45 am
  • bids: 0
  • Sold: 0
  • best offer: false

Ratings:

  1. Fast shipping Great seller!!! 05-10-17
  2. Great communication. A pleasure to do business with. 05-09-17
  3. A 05-07-17
  4. Great communication. A pleasure to do business with. 05-08-17
  5. A Seller Fast Shipping !!!! Received on 6 May 2017 05-08-17

General hamamateuradio:

  • in stock: Yes
  • consumer Electronics > radio communication Electronics > ham amateur radio communication
  • condition: New

Shipping hamamateuradio:

  • type: Calculated
  • cost: $0.0
  • handling: 1 days

Payments hamamateuradio:

  • PayPal

Returns hamamateuradio:

  • paid by: Buyer
  • type: Money Back
  • details: Unused item in original packing.
  • time: 30 Days
  • policy: returns accepted
part type: antenna tuner interface, country/region of manufacture: united states,
category: electronics > radio communication electronics > ham amateur radio communication, sku: 1954832648211292,
Review#1 Fast shipping Great seller!!! ()
Review#2 Great communication. A pleasure to do business with. ()
Review#3 A ()
Review#4 Great communication. A pleasure to do business with. ()
Review#5 A Seller Fast Shipping !!!! Received on 6 May 2017 ()
Artcraft Electronics AEAH-4 Is Similar To:
  • (84.9% similar) Each AEAH-4 is tested with the allowing ken wood TS-2000 to work AH-4 tune up a light bulb. The AEAH-4 has three connecting cables: one for power which supplies to icom AH-4 as well, interface with 4 pin mole connector AH-4, and provide cw keying transceiver. Set your transceiver for 10W cw output ...(May 31st, 2017)
  • (61.2% similar) The AEBOB4U employs a solid state buffer and driver so keying voltage current is low. If you exceed that limit might be setting yourself up for an expensive failure at inconvenient time. Ground is continuous within the AEBOB4U. It has rca phono jacks and power pole dc connectors which are ...(May 7th, 2017)
  • (76.3% similar) Shipping is fast. They do not impair touch accuracy and keep the smoothness soft-touch feeling of original display. Real touch sensitivity savvies SU75 screen protectors are optimized for use on screens. High quality the savvies SU75 ultra clear screen protectors are manufactured in Germany with ...(October 7th, 2017)
  • (63.3% similar) These cables are precision crafted from the best components and sub assemblies. Artcraft Electronics yeas FT-817 FT-857 FT-897 FT-991 transverse amplifier Pitt keying cable...(October 21st, 2017)
  • (43% similar) Us shipping is USPS priority mail. If you key up on 2m the cable marked goes low, etc. Components sourced world wide. The quadrupeds consists of an 8 pin 262 din plug and four outputs, each which are three feet cable terminated in rca phono. A new product from Artcraft Electronics: the ken wood TS-...(March 26th, 2018)

Copyright © hamamateuradio.com