MYAT 201-025 Unflanged Connector 1-5/8

( Brand: Myat ), ( Manufacturer Part Number: 201-025 ), ( Type: Connector )

Review MYAT Unflanged Degree Connector 1-5/8 Inch

The **Myat 201-025 Unflanged 90 Connector (1-5/8")** is a precision-engineered, high-performance elbow fitting designed for seamless integration into hydraulic, pneumatic, or fluid power systems where reliability and durability are paramount. Crafted from high-quality **carbon steel** with a **black oxide finish**, this connector is built to withstand demanding operating conditions, including high-pressure applications, frequent cycling, and exposure to harsh environments. Its **unflanged design** eliminates the need for additional gaskets or sealing materials, simplifying installation while maintaining a secure, leak-proof connection through a **male-to-male threaded interface** (1-5/8" NPT). The **90-degree angle** allows for efficient routing of lines, reducing space constraints and optimizing system layout without compromising structural integrity. Engineered with **tight tolerances**, the fitting ensures a consistent, vibration-resistant seal, minimizing the risk of fluid leakage or system failure over extended use. Whether deployed in industrial machinery, automotive systems, or heavy-duty equipment, this connector delivers exceptional performance, combining strength, precision, and ease of maintenance to enhance operational efficiency. Its robust construction and corrosion-resistant finish make it an ideal choice for applications requiring long-term reliability in both clean and contaminated environments.

### Pros and Cons of buying a **MYAT 201-025 Unflanged 90 Connector (1-5/8")**

1. **Compatibility and Standardization** The 90 unflanged elbow is a common fitting in plumbing and HVAC systems, making it easy to integrate into existing setups. It connects pipes at a right angle without requiring flanges, simplifying installations where space or cost is a concern.

2. **Cost-Effective** Compared to flanged fittings, unflanged connectors like this one are generally more affordable. They eliminate the need for additional hardware like bolts, nuts, and gaskets, reducing both material and labor costs.

3. **Ease of Installation** Since it lacks flanges, this connector can be installed more quickly, especially in tight spaces or where access is limited. It typically relies on slip-on or push-fit connections (depending on the pipe type), which can be easier to handle than threaded or bolted joints.

4. **Lightweight** Without the added weight of flanges, this fitting is lighter, which can be beneficial for overhead installations or when transporting materials.

5. **Versatility** The 90 angle is useful for routing pipes around obstacles, changing direction in plumbing, or fitting into compact systems. The 1-5/8" size is a standard dimension, making it suitable for a range of applications, including residential, commercial, and light industrial use.

6. **Durability (if material is suitable)** If the connector is made from durable materials like **CPVC, PVC, or Schedule 40/80 PVC**, it can withstand moderate pressure and temperature ranges, depending on the application. However, this depends entirely on the material specification (not provided here).

7. **No Leak Risks from Flange Gaskets** Unlike flanged connections, which can leak if gaskets degrade or bolts loosen, unflanged connectors rely on the pipe s natural seal (e.g., solvent welding for PVC or compression for metal pipes), reducing potential failure points.

---

1. **Limited Pressure and Temperature Ratings** Unflanged connectors are typically rated for lower pressure and temperature ranges compared to flanged or threaded fittings. For high-pressure or high-temperature applications (e.g., steam systems, industrial processes), flanged connections are often required for safety.

2. **Less Secure for High-Vibration Environments** Without flanges, the connection may be more susceptible to loosening or shifting under vibration (e.g., in machinery or seismic zones). Flanged joints can be tightened to handle such conditions better.

3. **Difficulty in Disassembly** Once installed, unflanged connectors (especially solvent-welded PVC ones) are often permanent and cannot be easily removed or replaced without cutting the pipe. This can be problematic for maintenance or modifications.

4. **Potential for Leaks at Joints** If the connection relies on gaskets or compression (e.g., in metal pipes), improper installation can lead to leaks. Unlike flanged joints, which can be periodically checked and tightened, unflanged joints may require more frequent inspections.

- **PVC/CPVC**: Not suitable for hot water or chemicals that degrade plastic.

- **Metal (e.g., steel, brass)**: May corrode over time, especially in outdoor or corrosive environments.

- **Poor-quality materials**: May crack, warp, or fail under stress, leading to system failures.

6. **Not Ideal for High-Stress Applications** In applications requiring frequent disconnection (e.g., portable systems, temporary setups), flanged or threaded fittings are more practical.

7. **Limited Availability of Replacement Parts** If the connector fails, replacing it may require cutting and re-piping, which can be labor-intensive. Flanged systems allow for easier repairs.

---

The **MYAT 201-025 unflanged 90 connector (1-5/8")** is a practical choice for **low-to-moderate pressure applications** where cost, simplicity, and ease of installation are priorities. It excels in **residential plumbing, light commercial systems, or non-critical HVAC setups** where high durability or frequent disassembly isn t required.

- High-pressure or high-temperature environments.

- Applications with significant vibration or seismic activity.

- Systems where disassembly for maintenance is necessary.

- Industrial or commercial settings with strict safety or leak-proofing requirements.

If your application involves **critical piping, high stress, or frequent inspections**, a **flanged or threaded fitting** would be a safer and more reliable option despite the higher cost.

---

- You are working on a **residential plumbing project** (e.g., rerouting pipes in a home).

- The system operates at **low pressure** (e.g., water supply lines under 100 PSI).

- You need a **quick, cost-effective solution** without frequent maintenance needs.

- The material (e.g., PVC) is compatible with your fluid type (e.g., cold water, not chemicals or hot water).

- Your system involves **steam, high-temperature water, or corrosive substances**.

- The pipes are subject to **vibration, movement, or seismic activity**.

- You require **easy disassembly** for repairs or modifications.

- The application is **industrial or commercial-grade**, where flanged fittings are standard.

- For **higher reliability**, opt for a **flanged 90 elbow** (e.g., MYAT 201-026 or similar).

- For **metal piping**, ensure the connector is made of **galvanized steel, stainless steel, or brass** to prevent corrosion.

- Always **check the material specifications** (not provided here) to confirm compatibility with your fluid and pressure requirements.

If you confirm that your use case aligns with the pros listed above, this connector is a solid, budget-friendly option. Otherwise, prioritize durability and safety with a different fitting type.

Details:

Myat 201-025 90 degree elbow for 1-5/8 unflanged line. Includes anchor inner, and one bullet.

specifications hamamateuradio:

• brand: Myat
• mpn: 201-025
• type: Connector

payments hamamateuradio:

• other
• credit card: Mastercard
• wallet: Apple-pay

general hamamateuradio:

• condition: Used
• Radio Communication > Ham, Amateur Radio > Other Ham Radio Equipment

shipping hamamateuradio:

• cost: $8.65
• service: USPS Ground Advantage
• carrier: USPS
• transit: 4-9 Days
• class: Standard
• type: Calculated

seller hamamateuradio:

• city: Powell, Ohio
• rating: 100.0%
• # reviews: 319

offer hamamateuradio:

• availability: In Stock
• options: Ship-to-home
• sold: 0
• started: March 19, 2026
• quantity: 1

returns hamamateuradio:

• policy: No Returns

Myat 201-025 Is Similar To:

• Myat 201-107 1-5 8 Inch Couplings 50 Ohm 1 Lot Of 6 New In Box Rem Good Used Condition (30.2% similar) 1 is new in box, the remainder are used good condition. 1 lot of 6 couplings, Myat 201-017 1-5/8 50 ohm transmission line fittings...(December 16th, 2024)